As mobile phone become more and more
important, mobile phones have become a necessity in our lives. With the
development of this trend, most people nowadays will intsall a screen protector
on the phone screen, one is to prevent the phone screen from scratch,
and the other is to prevent phone screen from being accidentally
dropped.
There have to say, now a mobile phone touch screen technology, most of the current mobile phone in order to pass the screen touch speed, through the sensitivity of the sensing, capacitive screen technology
is applied. This technology mainly uses the conductor characteristics
of the human body and the interaction of the screen capacitance to
perform the sensing operation.
Simply
speaking, the human body is equivalent to an electrode. When the finger
touches the phone screen, the screen is inductively opposite to the
other electrode. The two sides meet to form a capacitor, and then the corresponding controller can accurately position the finger and perform corresponding Touch, to achieve accurate touch sensing.
Moreover,
because the sensing speed occurring in this process is very fast and
the sensitivity is high, this technology gradually replaces the
traditional screen technology and becomes the mainstream technology of
the current mobile phone screen application. But he also has a
disadvantage, that is, wet water can not be sensed.
Because water is also a kind of conductive body, the combined action of
the three parties will cause the induction to be not accurately
recognized.
Then
some people have said that the screen protector is not a conductive
material, so there is no influence on the touch of the mobile phone.
Although
this is true in theory, in fact, due to the different materials and
thickness of the protective film, it has some influence on the
sensitivity of the screen. Especially on screen fingerprint recognition,
the impact is more obvious. Nowadays, many smart phones use screen
fingerprint recognition technology. However, because the mobile phone
screen guard is not suitable after the screen protector is applied, or
the thickness is too large, the recognition accuracy is reduced, and sometimes the fingerprint recognition is not very sensitive.
Although
it is not excluded, there are still imperfections due to technical
screen fingerprinting. Now there is a more intuitive way to open the
phone settings, enter the developer options, then drop down to find "tap action feedback",
open, and then we can slide on the screen, the screen will show a small
ball With the movement of the finger, in the case of moving at
different speeds, by observing the different moving distance between the
ball and the finger, the delay phenomenon of the touch sensing of the
mobile phone screen can be seen.
However, many mobile phone films now have less and less impact on mobile phone fingerprint recognition and touch sensitivity. I believe that new technologies will bring better mobile phone experience to users in the future.
Mobile phones are an essential electronic product for us. In order to better protect mobile phones, most of us choose to attach a screen protector to our mobile phones. However, there are many kinds of mobile phone screen protective film on the market, such as anti-spy screen film, high-transparent screen film, matte screen film, etc., as there are so many kinds that we cannot choose the better one. Today,
Lito will introduce you to the mobile phone screen protectors and their
respective characteristics, according to their characteristics, you can
choose the most suitable mobile phone protective film!
PET Film Nowadays,
PET film is used less and less. Generally, the newly purchased mobile
phone will bring a PET film. The biggest advantage of this type of
cellphone screen protector is that it is cheap, but it is easy to scratch and the touching is not good. As for the hardness, the PET film has almost no hardness at all, and it is not shock-resistant.
In
addition, the PET film is not easy to install, and it is easy to appear
bubbles if it is not well attached. So we generally don't recommend the
PET film, unless it is emergency or not care about what screen
protector can be selected.
Tempered Glass Screen Protectors The tempered glass screen protector is the most commonly used one. The tempered glass is the high-temperature treated glass. The hardness of the mobile phone screen protector made of this glass is greatly increased, and it is generally divided into a full covered tempered glass and a non-full coverage tempered glass.
Full covered tempered glass is suitable for many smartphones with 2.5D screens. The full coverage tempered glass film is more integrated, because the whole body is made of glass, so the hand feel
is also very good. The full cover tempered glass film with a frame
generally has a certain curvature, which can be wrapped around the edge
of the mobile phone to prevent the edges from being scratched and not easily broken.
The non-full-screen tempered glass is relatively simple, mainly protecting the middle screen
from being scratched, and basically does not affect the original feel
and color of the phone edge, portion of the mobile phone. However, since
the edge of the phone cannot be protected, if the edge is bumped, the
screen of the phone may be broken.
Nano TPU Film Since the mobile phone is constantly updated, many curved screens have came out, and the nano TPU film has become popular. In fact, the essence of nano TPU film is also a plastic film, but the nano tpu film is a soft soft TPU film with a super flexible honeycomb structure. Different from the tempered glass, it is thick and hard. The Nano TPU film is thin and soft, it can 360 degree perfect fit the mobile phone, which is very suitable for curved screen mobile phones.
The advantages of the nano TPU film is that is can be covered in full screen. It is more resistant to fingerprints and oil than the traditional HD Film. It is lighter and softer,
and it can repair the slight scratches automatically. However, the
essence of Nano TPU film is still a plastic film, which is certainly not
comparable to the tempered glass screen protector in terms of hardness
and transparency.
In addition, there are many different mobile phone screen protector on the market to meet people’s needs.
Anti-Spy Screen Protector The user of anti-spy screen protector can see the picture on the phone screen on the front side, while the others look at the screen on the side is black,
so it has the function of anti-peeping. However, the clarity and
transparency of this type of mobile phone screen protector is not high,
the screen is dark, and long-term use will also damage the eyes.
Anti-blue light Screen Protector Because most mobile phones now have a Blu-ray filter mode,
you can also achieve anti-Blu-ray effects by reducing the brightness or
turning on the night mode. The ultraviolet light emitted by the phone
screen is negligible. Therefore, this type of mobile phone film that
mainly protects against blue light and ultraviolet rays is actually not
effective.
Back Screen Protector There is also a mobile phone film that is a back film.
Most people now choose to wear a mobile phone case, but some people
think that the thickness of the mobile phone case affects the hand
feeling. If you want to protect the back cover of the mobile phone, you
can choose to apply the back film. The backing film is available in a
clear, matte and patterned decorative backing.
In
general, the choice of mobile phone film is not complicated, just to
find out your needs and preferences. Of course, the mobile phone screen
protector is not omnipotent. We should pay careful attention to the use
of the mobile phone during daily use to avoid violent impact on the
mobile phone, sharp scratching, water immersion and other injuries.
What are the disadvantages of oleophobic coating? What are the advantages of oleophobic coating? The application of oleophobic coatings (also known as oleophobic layers)
is becoming more and more extensive. In addition to the surface of
precision instruments, many scenes requiring high cleanliness will also
adopt oleophobic coating. Of course, the oleophobic layer is known and
contacted by users most of the fingerprint lock screen and mobile phone touch screen.
The addition of oleophobic coating has many advantages, but there are
also some troublesome shortcomings. Now let me tell you more.
What are the advantages and benefits of oleophobic coating? 1.Keep clean, screen oleophobic coating generally uses nano-materials, using electroplating
process, forming a protective film on the screen surface, with
hydrophobic and oleophobic functions, oil stains are not easily
contaminated, easy to wipe, can effectively keep the screen clean.
2.Enhance the operation feel, the nano-material of the oleophobic layer has a smooth surface, smooth operation, does not increase the friction of the fingers, greatly reduces the obstruction phenomenon, and the touch is better.
3.To ensure touch sensitivity,
oil contamination will reduce the sensitivity of fingerprint
recognition, finger touch and other operational reactions, affecting the
use efficiency, oleophobic layer cleaning ability is the guarantee of sensitivity.
In addition, the oleophobic coating has the characteristics of low process cost, which provides the first conditions for mass production.
Although the application of oleophobic layer is extensive, it is not a perfect material and still has some shortcomings. 1.Poor wear resistance, screen oleophobic layer due to the requirements of the touch experience, generally, the thickness can be neglected, long-term high-intensity use will cause the phenomenon of shedding wear, thus greatly affecting the user experience.
2.The process standards are not uniform,
the process requirements of different screen surface oleophobic layer
are different, resulting in different quality and experience, and does
not meet the technical standards required for production and use.
The
abrasion of the oleophobic layer is a headache for many users. After
the oleophobic coating on the surface of the mobile phone screen or the
smart lock touch screen is worn away, it is recommended to purchase the
oleophobic layer to solve the problem, that is, the tempered glass screen protector and nano liquid screen protector, so we can protect our phone screen from any scratched.
Nowadays, the 3D curved tempered glass we know have two types: Hot-bend and cold-engarved tempered glass, but how to select the suitable one for our mobile phones?
Do
you know the different between hot bending and cold carving? From the
price, it can be seen that hot bending tempered glass is more cheaper
than the cold carving tempered glass? But why?
The
same is the tempered glass screen protector, with different produced
technology, the effect of the tempered glass will be different. Hot-bend
tempered glass screen protector is softened by heating and then formed in a mold, and finally annealed, and the yield is higher than cold carving tempered glass. The cold-engarved tempered glass is carefully carved by the CNC machine, which has a stronger of craftsmanship and a higher quality.
The tempered glass screen protector adopts the real screen opening mode, with the whole high-quality cold carving glass,
precise opening, accurate scale reduction, and the rounded corner
design of the 3D surface, so that the body curvature and the surface of
tempered glass is perfect fit the phone lcd screen, the integration is
stronger, just like the original phone. But cold carving tempered glass
has its disadvantage. Due to the deformation during the tempering
process, after the finished tempered glass screen film is formed, it is
easy to cause poor exhaust/unstable and difficult to exhaust.
The hot-bend tempered glass screen protector is mainly used to make a large curved edge tempered glass, the advantage of this technology is that the curvature of the curved surface is large and beautiful. The disadvantage is that the product has no texture overall, the hand feeling is not good, and it is easy to scratch hands.
Have you ever seen a rainbow effect in the tempered glass screen protector? Do you know why glass screen protector film have rainbow effect? And how do we eliminate the rainbow effect?
1.What is rainbow effect? Here the rainbow effect we called is a phenomenon that generally appear arise at the surface of mobile phone screen protector, and it is similar to a rainbow.
2.The harm of rainbow effect The harm of tempered glass rainbow effect is that it reduces the transmittance
of the screen protective film. It also causes the screen protector
convey the distortion of the screen color, and affects the our visual experience.
3.So why are there rainbow effect, do you all know the reason? There are two reasons for the rainbow effect appearing after we installed tempered glass screen film: First, the screen protection film is made of a multi-layer structure, and when the light is irradiated, the refraction produces a rainbow effect. On the other hand,
the "rainbow effect" is created because when the substrate needs to be
subjected to a high temperature during the hardening treatment. In the
high temperature treatment, the molecular structure of the substrate
surface is uneven to cause scattering.
The presence of rainbow effect affects light transparency and
visual effects. It is difficult to see the rainbow effect with the
naked eye after installation the high quality glass screen film. Rainbow
effect is actually the product of hardening treatment. The higher the
strength of the hardening treatment, the more difficult it is to control
the rainbow effect.
In
addition, when the PET substrate is subjected to surface hardened
hardening treatment, it is also susceptible to coating equipment and
curing materials. If the equipment and materials are improperly
selected, it is easy to cause uneven surface coating, which leads to
rainbow effect.
4.So, the rainbow effect is so much harmful, how do we eliminate the rainbow effect?
Once the temperature rises to 35 degrees, the rainbow effect on the glass screen protector will disappear automatically.
The screen protection film is pressed under high temperature environment, when it encounters a sudden low temperature,
it will lead to uneven local light transmission, resulting in rainbow
effect. When the temperature rises and the overall temperature of the
phone screen protector film tends to be the same, the rainbow effect
will disappear automatically.
If it is a rainbow effect caused by the water
on the screen, then we don't have to worry too much, it will naturally
return to normal in a few days. If it is caused by external forces, then
here we suggest to buy a new screen protector.
Many people think that the noise cancelling headphones are to help us eliminate all the noise except the music you listen, but it is not.
A true noise cancelling earphone is a type of earphone that uses some method to reduce noise. Mainly to meet the better noise shielding in the noisy environment, so as to experience better listening effects, such as in some noisy office, mechanical noise during flight, noise cancelling headphones can isolate most external connections noise (Active noise canceling headphones), so listening to songs will not be interfered by excessive external noise and can enjoy high quality music.
At present, here have two types of noise cancelling headphones in the market. They are Active noise cancelling earphone and passive noise cancelling earphone.
The active noise canceling function is to generate a reverse sound wave equal to the external noise through the noise reduction system, neutralize the noise,
and achieve the effect of noise reduction. Active noise cancelling
headphones with noise reduction circuit that competes with external
noise. Most of them use a large head-mounted design, using the earphone cotton and earphone casing
to block the external noise, and to be the first round of sound
insulation. At the same time, in order to have sufficient space to
install active noise reduction circuits and power supplies.
Passive noise reduction earphone mainly form an enclosed space by surrounding the ears, or use soundproof materials
such as silicone earplugs to block external noise. Since the noise is
not processed by the noise reduction circuit chip, generally only high frequency noise is blocked, and the noise reduction effect on the low frequency noise is not obvious.
So the effect of the active noise cancelling headphones is more obvious than that of the passive noise cancelling headphones, that’s why most user like the active noise cancelling headset.
And here Shirley recommend two ANC noise cancelling headphones for your reference: NO. 1: Lito-J2 Active Noise Cancelling Headphone:
Battery capacity: 500mAh Battery type: lithium polymer Bluetooth version: 4.1 Bluetooth chip: CSR8635 Noise reduction chip: AMS3435 Speaker size: φ40mm Playing time: Noise reduction + Bluetooth simultaneously: 16 hours Bluetooth enabled separately: 25 hours
NO. 2: Lito-J3 Active Noise Cancelling Headphone: Battery capacity: 500mAh Battery type: lithium polymer Bluetooth version: 4.1 Bluetooth chip: CSR8635 Noise reduction chip: AMS3435 Speaker size: φ40mm Playing time: Noise reduction + Bluetooth simultaneously: 16 hours Bluetooth enabled separately: 25 hours
Bluetooth wireless communication technology as an open global standard for wireless data and voice communications,the first application was to replace the headphone cable in the field of voice communication.
Until the 4.0 version of the low-power Bluetooth technology is widely used in smart wearable devices and smart home devices, these are gradually upgraded from the original Bluetooth headset era, and now the smart devices for Bluetooth technology applications are more and more popular.
Many friends have encountered such problems when using Bluetooth devices. The signal is intermittent, sometimes strong and sometimes weak, affecting the use of the device. What caused this? Today we have a introduction to the phenomenon of signal difference between Bluetooth receivers.
Bluetooth is a wireless technology standard for exchanging data between fixed and mobile devices over short distances using short-wavelength UHF radio waves in the industrial, scientific and medical radio bands, from 2.400 to 2.485 GHz, and building personal area networks (PANs).
Moreover, Bluetooth is a radio technology that supports short-range communication of devices (maximum transmission distance of 100 meters),
which can effectively simplify communication between mobile
communication terminal devices, thereby making data transmission more rapid and efficient, it uses a decentralized network structure. As well as fast frequency hopping and short packet technology, it supports point-to-point and point-to-multipoint communication.
The 100 meters mentioned here refers to the maximum transmission distance and is in the condition of no obstruction.From the above, we can speculate that the possible reasons for the bad Bluetooth headset signal are as follows:
1.The Bluetooth Version - The Bluetooth version is an important aspect that affects the connection of Bluetooth headsets. The higher the Bluetooth version, the faster and more stable the signal transmission, and In the process of talking and listening to songs, consumers will encounter fewer signal disconnection and sound jams.
At present, Bluetooth headset products on the market generally use
Bluetooth version 4.2, and some mid-to-high-end products have been
adopted Bluetooth version 5.0.
2.The quality of the headphone, if it is not good, the Bluetooth transmission effect will also affect;
3.Because the human body and clothing are blocked, the Bluetooth transmission is blocked;
4.The Bluetooth earphone battery is about to be empty, and the transmission capacity is degraded.
So in the process of inspection, we can find that these methods can solve the problem of poor signal. The position of the mobile Bluetooth headset, if the signal changes with the position change, the possible reason is "The third point"; if the signal does not change significantly, the earphone is charged, and the effect is tested after full charged; if the above two points are all tested, It is the problem of the transmission capacity of the Bluetooth earphone itself (quality problems and service life problems), which can be replaced or repaired as appropriate.
Of course, there is also a situation where Bluetooth and Wi-Fi signal interference problems may have been encountered. Both of them mainly use the 2.4GHz frequency band. When both are turned on, the data throughput of Bluetooth will drop sharply, and the pairing equipment is difficult. Wi-Fi is intermittently interrupted and the network is limited.
At present, there is basically no way to deal with this problem, but
you can temporarily solve some problems for you by the following scheme.
Method 1: Connect to a 5GHz wireless network Now that you know the problem is in the band conflict, consider buying a dual-band (2.4GHz+5GHz) router and connecting to a 5GHz Wi-Fi network. This method can completely solve the interference problem, but cost a lot of money.
Method 2: Replace the Wi-Fi channel Take the TP-Link router as an example. Log in to the router web management page and find the channel option in Wireless Settings -> Basic Settings and change it to any of 1, 6, and 11. These are 2.4 GHz non-overlapping transmission channels, which are more stable than other channels.
Method 3: Turn on the NIC Bluetooth coexistence function In the wireless network cards produced in recent years, Bluetooth coexistence is supported. The method is to find Bluetooth Collaboration or Bluetooth Coexistence Mode (name may be different) in the Advanced tab of the network adapter properties, and set it to Enable. Windows will automatically reconnect to Wi-Fi, and the interference with Bluetooth will be alleviated.
Method 4: Keep away from interference sources Separate the Bluetooth terminal from devices that use the 2.4 GHz band, such as routers, microwave ovens, and cordless phones.
Nowadays, headphones & earphones have become a important “friend” for everyone. When we are having a relax, working, playing games, and learning lessons, we all cannot leave without it. And with the launch of wireless Bluetooth earphones, now the earphones are more popular and most people love it.
But with the continuous development of headphones, what damages does the headphone cause to our body? Many people say that wearing headphones for a long time will damage hearing. Is this correct? And does the wireless Bluetooth earbuds have radiation problems?
Wearing headphones for a long time can damage your hearing?
Like other senses, there is a special hearing "receptor" in the ear - the ciliated cells in the cochlea. The reason we can hear the sound is because the ciliated cells are stimulated, and oscillate as the sound vibrates. However, once the cilia swings too much, the sensitivity is reduced and it will damage the hearing in the long run. This damage is gradual, and there is no obvious hearing change at the beginning, so it is always easy to be ignored. Once it is discovered, it is too late.
Relevant medical data also shows that when the volume heard by the human ear exceeds 85 decibels, the longer time can cause hearing fatigue. When the volume is above 110 decibels, it is enough to cause the hair cells of the human ear to die, and in severe cases, it can cause deafness.
So how do we prevent the damage that headphones bring to us? Expert advice: "Do not wear headphones for more than 1 hour, the intensity should not exceed 2/3 of the maximum volume."
Do you want to use headphones and want to protect your hearing? Then remember these five points:
1.Noisy occasions, do not listen
When
the outside noise is large, in order to hear the sound in the earphone,
we will increase the volume unconsciously, which will increase the
damage.
2. Quiet occasion, low volume listening
In a quiet environment, just set the volume to be clear.
3.Limit the maximum volume
When using the headphones, never turn the volume up to the maximum, preferably no more than 2/3 of the maximum volume.
4.The head design headphone is relatively safe
The
headset has a large contact area and a small pressure, which is
relatively less irritating to the cochlear ciliated cells and is
relatively safer.
5. Avoid listening for a long time
To get rid of the bad habit of using headphones for a long time, WHO recommends that it is safer to not exceed 1 hour each time. If
you feel tinnitus, hearing loss, pain in your ears, and secretions,
please go to the ENT department for further treatment as soon as
possible.
Does the wireless Bluetooth headset have radiation problems? What is radiation? Radiation
refers to the phenomenon that part of the electromagnetic energy
emitted by the field source propagates away from the field source and
then returns to the field source, and the energy spreads out in the form
of electromagnetic waves or particles (such as alpha particles, beta
particles, etc.). Radiation itself is a neutral word, the name of energy
transmission, and light is also a kind of radiation. Everything in
nature, as long as the temperature is above zero in absolute
temperature, such as the human body, is constantly transmitting heat in
the form of electromagnetic waves and particles. This way of
transmitting energy can be called radiation.
What is common radiation? Radiation is divided into solar radiation, electromagnetic radiation and thermal radiation. Common electromagnetic radiation is emitted by electrical appliances.
Any consumer has electromagnetic radiation, such as a light bulb. When
the electromagnetic wave radiation intensity exceeds the standard amount,
it will have a negative effect, causing different diseases of the human
body, which may cause harm to human health. This part of the
electromagnetic wave radiation exceeding the standard amount is
electromagnetic radiation pollution.
What is the radiation value of the Bluetooth headset? Expert organizations such as the World Health Organization and the IEEE said that the radiation of the Bluetooth headset was not found to be harmful to the human body.
The output power of the Bluetooth product is about 2 milliwatts,
which is one-millionth of the power used by the microwave oven. It is
one-thousandth of the power of the mobile phone (mobile phone). The
radiation of Bluetooth headsets are more safe for the human body, and
children and pregnant women can use it with confidence.
Of course, the output power is set to achieve its design purpose. The transmission distance of the Bluetooth headphone is about 10 meters, so only a very low power can be used to achieve the purpose of 10 meters transmission, and because the power of the Bluetooth headset is small, Its penetration ability is also limited.
In fact, the radiation of the Bluetooth earphone is almost negligible.
For example, the fluorescent light in your room is larger than the
radiation from the Bluetooth headset. Bluetooth headsets have low
radiation, which is one of the reasons why many people are optimistic
about Bluetooth headsets.
What is screen protector easy applicator? Just like its name, because of its functional characteristics, make us easily to install tempered glass screen protector without any bubbles and easy to accurate the hole of mobile phone.
If you bought a LITO first generation glass screen protector easy applicator
before, although it is making us easily to install tempered glass,
because of it is too large, it not only takes up space, but also causes
an increase in our transportation costs.
So what kind of optimization does the Lito Product Department do for this shortcoming? Today, let shirley introduce you to the new generation of glass screen protector easy installation.
The second generation of phone screen protector easy application has changed a lot from the appearance, from the original large volume to a small tool now, not only will not increase the cost of transportation, but also help us better to install tempered glass.
After reading this tool, you will definitely think, how can it be installed? As a photo below: Using a PET film + a small amount of glue to adhere to the tempered glass screen protectors, the combination of the bottom hole position and the tool, then to be a installation tool, how about it? Too simple, right?
And here to tell everyone a good news, PET film can also be customized LOGO,
the first generation of screen protector tools due to its matte PC
material, can not achieve custom LOGO, but the second generation
applicator can be done.
Use the charging socket of the mobile phone to connect the mobile phone with installation tool, so that we don't need to worry about how to accurate the screen protector onto the phone hole.
For the first generation of screen protector applicator tools,
Samsung and Apple's tempered glass require a separate mold, and now the
second generation of applicator tools are not needed, a small tool, but
full of great energy.
And the installation tool is not only suitable for tempered glass screen protectors, but also for nano TPU film.
Currently available for iPhone models and Samsung popular models.
If there is anything you don't know well, then please see the video below:
iPhone Front & Back Tempered Glass Screen Protector: Glass Material: High silicon aluminum Thickness: 0.33mm AB glue: 130AB Korea glue Anti-finger oil: Japanese CNC: +/-0,03mm Transmittance: 90-92% Wear-resisting: 1500 times Water Drop Angle before rub: 110°, after rub 80-97°, with 500g ball Tempering: 4H, at 400℃ Hardness: 9H Ball drop: g/cm/ times, 32g 40cm
Samsung 3D Full Cover Tempered Glass Screen Protector: Glass Material: Japan Asahi Glass Hardness of Tempered Glass: 9H Tempering Time: 4.5H Thickness of Glass: 0.25MM Transmittance Level: 93% Anti-Finger Print Coating Type: Japan Daikin fingerprint oil Thickness of Glue: 0.07mm Country of Origin of Glue: Japan Wear-resisting: 3000 times Water Drop Angle before rub: 110°, after rub 100° Ball drop: 32g/60cm/3 time
Please contact us if you are interested. Contact Person: Shirley Wong M: 0086-18589219627 Email: shirley@litoscreen.com Whatsapp: +86-18589219627 Wechat: glass627 Skype: shirley.wong66 Website: www.litoscreen.com
Will screen protector remove oleophobic coating? Nowadays, many mobile phones have oleophobic layers to reduce the stains on the phone. If we usually use the mobile phone screen protector,
will it remove the oleophobic coating? So let us to understand what is
the oleophobic layer. What is the function of the oleophobic layer?
What is the oleophobic layer? We also called oleophobic coating, or hydrophobic coating. As the name suggests, it is a composite coating, which is often coated with nano-silica as a raw material or a nano-scale fluorine-containing material. This coating combines the characteristics of light transmission.
In
the field of mobile phones, this coating is mainly used on the screen
of mobile phones. It is true that the screen of the mobile phone needs
to be very transparent, so it should be as thin as possible and does not
affect the display screen of the mobile phone. Its function is to make
the phone screen easier to clean and not easy to leave fingerprints and perspiration.
At the same time, some mobile phone manufacturers will improve the
screen sliding experience when choosing a coating, which makes the
screen coating smoother and more natural.
Its
principle is not complicated. The contact area of the layer with oil or
water is relatively small (compared to a simple glass layer). It
originates from a special nanostructure, so the water droplets are like
the top of the blade, and it is not easy to attach to the phone screen
which it is the so-called "cleaning effect" of the plant leaves.
Mobile phone tempered glass with oleophobic layer
Phone screen after the coating is worn
As
can be seen from the picture, the new mobile phone with oleophobic
cpating and the mobile phone that has been almost wiped out by the
oleophobic coating for a long time are really different, and the water
droplets will spread out.
The misunderstanding of the oleophobic coating There
has been a lot of debate about the oleophobic layer. The focus of the
debate is that a heavyweight mobile phone of a heavyweight brand has
been exposed without oleophobic layers. In fact, this feature is not
required, and there are no regulations or mandatory requirements. Mobile
phone manufacturers use oleophobic layers on high-end products to
provide a better used feeling.
This
configuration is not absolute, not that it must be good. It is true
that the oleophobic layer can make the glass perform better, but this
performance is not lasting. Because the coating is very thin, it will
gradually wear out in daily use. Generally, there will be nothing left
in a few months. So the experience is very good at first, and you will
find that mobile phones are getting more and more dirty on the screen
after few months. In addition to the normal wear and tear of the mobile
phone screen, there are many traces of scratches and friction that are
invisible to the naked eye, which will cause the oleophobic layer to
fall off.
So how to better protect our mobile phone? First
of all, if the original factory mobile phone has no screen protector
and comes with an oleophobic layer, then the user can use it with
confidence, and the screen can be cleaned well until the oleophobic
layer is worn out. If the phone has a screen protector at the factory,
it is best not to remove the screen protector directly, unless you are
not used to the feel of the screen protector. Nowadays, the high-quality
screen protector often has a certain oleophobic effect, and even the
coating is attached, to protect our mobile phone screen from scratched.
If
you feel that the experience of the mobile phone has been affected, you
can also use the popular tempered glass screen protector or high-quality screen protective film.
As long as you pay attention to the screen of the mobile phone, it will
not be scratched, and it will not be placed with hard objects such as
keys.
